Hi Ansley and All,
I found a bug after upgrading from 6.5 to 6.6.7. When I transfer my plot
to eps with gksm2ps, the thickness of the lines are 1, no matter what is
set in the jnl. One of my scripts works fine with the former version but
has this problem after the upgrade.
I did not delete my older version during the upgrade, though, to keep
some customized scripts. Would this be the cause? Anybody has
experienced similar problem?
Thanks,
Tony
On Mon, 2011-02-14 at 10:07 -0800, Ansley Manke wrote:
Hi Martin,
We've just switched over to RHEL5 and libc.so.6 on our machine shows as
linking to libc-2.5.so. (Previous to that switch we were hearing from
users with newer linux systems who had library mis-matches, though
compatibility libraries generally lets one find the right library for
code built on an earlier operating system to run on a newer one.)
The executable in the tar file is already linked with all of the static
libraries we had available to us. We're very much aware of this issue,
and are thinking it may be time to work towards releasing source code
with a nice build process so people could build Ferret themselves. Even
as things stand now, building from source is not difficult, but does
require building HDF and NetCDF libraries. I haven't posted the source
code for this fixed version, but I'll do that later today.
We'll continue to work on a good general solution for this problem.
Ansley
On 2/14/2011 5:15 AM, Martin Schmidt wrote:
Dear Ansley,
I tried to install Version 6.6.7 at SLES10 but failed. libselinux.so.1
is missing. I tried to use a the lib from SLES11.
Now I end up with
ferret_v667: /lib64/libc.so.6: version `GLIBC_2.8' not found (required
by /linsoft/ferret_v667_64_dynamic/lib/libselinux.so.1)
Indeed, my libc.so.6 is a link to libc-2.4.so with SLES10. With SLES11
the link is to libc-2.11.1.so.
Is there any chance to benefit from the latest bug fixes at machines
that are not using the latest system version. Possibly by a more complete
static linking?
We are not able to update the system, because the system management is
linked with the hardware contract.
Greetings,
Martin Schmidt
Ansley Manke wrote:
Hi all,
There is a new release of Ferret available now, Version 6.6.7, which
corrects a recently reported bug in Ferret v6.6.5.
In Ferret v6.6.5, the last official Ferret release, the
multi-dimensional computation of a definite integral @DIN over X and
Z, but not integrating over latitude, is incorrect. This means that
the computation of quantities such as a meridional transport at a
fixed latitude, will be incorrect when calculated by Ferret v6.6.5.
The calculation was done correctly in the previous release, Ferret
v6.4, and is corrected in v6.6.7, which may be downloaded from the
Ferret Downloads page at
http://ferret.pmel.noaa.gov/Ferret/downloads
The Downloads documentation is updated and the main Ferret
documentation will be updated to reflect this new version number
shortly.
Ansley