[Thread Prev][Thread Next][Index]
Re: [ferret_users] Removing axis and plotting vectors outside of plot region
Excellent. Just what I needed.
Thanks,
Mike
On 5/24/11 11:05 AM, "William S. Kessler" <William.S.Kessler@xxxxxxxx>
wrote:
> Remove axes with:
>
> PPL AXSET,top,bottom,left,right
>
> use 1 to draw an axis, 0 to omit. (This command is persistent; reset
> to default by PPL AXSET,1,1,1,1).
>
> To draw outside the plot box (with or without axes):
>
> PPL WINDOW,OFF
>
> This is also persistent. Reset with PPL WINDOW,ON
>
> BK
>
>
>
> On 24 May 2011, at 10:22 AM, McCann, Mike wrote:
>
>> Dear Ferret users,
>>
>> We use Ferret to produce the plots at:
>>
>> http://www.mbari.org/oasis/m1/contour.tstring.html
>>
>> During this time of the year we have strong upwelling favorable
>> winds along the central Califronia coast. The full magnitude of
>> these winds are difficult to see in the plot because the vectors are
>> clipped at the right-hand edge of the plot.
>>
>> Is there a way (probably with some plotplus commands) to remove that
>> right-hand axis and permit the vectors to be drawn to their full
>> length outside of the axis boundaries?
>>
>> -Mike
>>
>> --
>> Mike McCann
>> Software Engineer
>> Monterey Bay Aquarium Research Institute
>> 7700 Sandholdt Road
>> Moss Landing, CA 95039-9644
>> Voice: 831.775.1769 Fax: 831.775.1736 http://www.mbari.org
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> William S. Kessler
> NOAA / Pacific Marine Environmental Laboratory
> 7600 Sand Point Way NE
> Seattle WA 98115 USA
>
> william.s.kessler@xxxxxxxx
> Tel: 206-526-6221
> Fax: 206-526-6744
> Web: http://www.pmel.noaa.gov/people/kessler
>
[Thread Prev][Thread Next][Index]
Contact Us
Dept of Commerce /
NOAA /
OAR /
PMEL /
Ferret
Privacy Policy | Disclaimer | Accessibility Statement