| Well, you could remove the right hand axis as you suggest:
PPLUS AXSET TOP,BOT,LEFT,RIGHT (1 is on, 0 is off)
pplus axset 1,1,1,0
BUT, I don't believe that it will plot outside of the graph (I could be wrong, and it would be easy to test).
You might have to do the stick plot mapped onto a longer time axis, in addition to turning off the right side axis. You would also then probably have to play with PPLUS AXLEN, etc. to make sure things still line up with the lower plot.
Mark Verschell
"What we have done for ourselves alone dies with us. What we have done for others and the world remains and is immortal." - Albert Pines
On May 24, 2011, at 1:22 PM, McCann, Mike wrote:
Dear Ferret users,
We use Ferret to produce the plots at:
http://www.mbari.org/oasis/m1/contour.tstring.html
During this time of the year we have strong upwelling favorable winds along the central Califronia coast. The full magnitude of these winds are difficult to see in the plot because the vectors are clipped at the right-hand edge of the plot.
Is there a way (probably with some plotplus commands) to remove that right-hand axis and permit the vectors to be drawn to their full length outside of the axis boundaries?
-Mike
--
Mike McCann
Software Engineer
Monterey Bay Aquarium Research Institute
7700 Sandholdt Road
Moss Landing, CA 95039-9644
Voice: 831.775.1769 Fax: 831.775.1736 http://www.mbari.org
|