Hi ferreters
I´m running ferret on windows XP following the instructions from http://www.ferret.noaa.gov/HOMEPAGE/Downloads/ferret_installation_win32.html
I start the X-server in cygwin typing ‘startx’ before launching ferret.
The X- server works fine (I can see xclock, for instance). However, when I try
to plot something with ferret it gives me the following error:
"Can't connect to X Server :0.0
Your DISPLAY environment variable must be set to
point to a working X server.
gopenws() 26 Specified workstation cannot be opened
gactivatews() 6 GKS not in proper state: GKS shall be either
in the state WSOP or in the state WSAC
gsetdeferst() 7 GKS not in proper state: GKS shall be in one
of the states WSOP, WSAC or SGOP
gsetlinerep() 7 GKS not in proper state: GKS shall be in one
of the states WSOP, WSAC or SGOP
ginqmaxwssttables() 22 Specified workstation type is invalid
ginqmaxwssttables() 22 Specified workstation type is
invalid
gupdatews() 7 GKS not in proper state: GKS shall be
in one of the states WSOP, WSAC or SGOP
gclearws() 6 GKS not in proper state: GKS shall be
either in the state WSOP or in the state WSAC
ginqwsconntype() 7 GKS not in proper state: GKS shall be in
one of the states WSOP, WSAC or SGOP
gsetwswindow() 7 GKS not in proper state: GKS shall be in one
of the states WSOP, WSAC or SGOP
gescsetdcsize() 7 GKS not in proper state: GKS shall be in
one of the states WSOP, WSAC or SGOP
gupdatews() 7 GKS not in proper state: GKS shall be in one of
the states WSOP, WSAC or SGOP
**ERROR: required program command has not been given: graphical output
device isnt ready"
I created the environment variable DISPLAY and gave the value ‘:0.0’. I I've
also tried to change DISPLAYs value but it ever appear the same message. It
only varies :0.0 which depends the given value.
I saw that other people had similar problems, but still could not solve
this connection problem. Does anyone have any tip?
Thanks for your Cooperation
_________________________________________________________________________________________
|
Igaratza Fraile
AZTI - Tecnalia
/ Marine Research Division
Herrera kaia portualdea z/g
20110 Pasaia (Gipuzkoa)
Tel: 94 657 4000 (Ext.718) - Fax: 943 004 801
e-mail: ifraile@xxxxxxx
www.azti.es ; www.tecnalia.info
|
|
Nahi baduzu,
nirekin euskeraz!
|
|
_______________________________________________________________________________
**************** LEGE OHARRA **************** AVISO LEGAL
**************** DISCLAIMER ****************
Mezu
hau pertsonala eta isilpekoa da eta baimenik gabeko erabilera debekatua dago
legalki. Jasotzailea ez bazara ezabatu mezua, bidali eta kontserbatu gabe.
Este
mensaje es personal y confidencial y su uso no autorizado está prohibido
legalmente. Si usted no es el destinatario, proceda a borrarlo, sin
reenviarlo ni conservarlo.
This message is personal and confidential, unauthorised use is legally
prohibited. If you are not the intended recipient, delete it without
resending or backing it.
|