Re: [las_users] Error while using apply analysis

[Sarang Gandhi HCL <sarang@xxxxxxxxxxxxxx>]

Hello Roland,

  coming back to same question can i add following ferret script to particular dataset 
 For the customizing operations.
Ferret Script "
 use "rf_10nov10" 
let rain=rf[X=70:80@ave,Y=10:20@ave]
LET p = t[gt=rain]
LET q = rain
SET GRID q
GO regresst
show var
SET VIEW upper
PLOT/SYM q
PLOT/OVER qhat
SET VIEW lower
LET/TITLE="rainfall - mean, trend" detrended = rain - qhat
LET/TITLE="ra - mean, trend" detrended = rain - qhat
PLOT rain, detrended "

N.B.-> If you can tell me again which are those file in which i have to make changes .


Thanks and Regards
Sarang Gandhi 



----- Original Message -----
From: "Sarang Gandhi HCL" <sarang@xxxxxxxxxxxxxx>
To: "Roland Schweitzer" <Roland.Schweitzer@xxxxxxxx>
Cc: "las users" <oar.pmel.las_users@xxxxxxxx>
Sent: Thursday, December 9, 2010 1:40:14 PM
Subject: Re: [las_users] Error while using apply analysis

Roland 
Thanks for the valuable  suggestion.
Will try to follow that.
Once i will gone through this workaround will let you know.

Thanks and Regards
Sarang Gandhi 

----- Original Message -----
From: "Roland Schweitzer" <Roland.Schweitzer@xxxxxxxx>
To: "Sarang Gandhi HCL" <sarang@xxxxxxxxxxxxxx>
Cc: "las users" <oar.pmel.las_users@xxxxxxxx>
Sent: Wednesday, December 8, 2010 8:19:13 PM
Subject: Re: [las_users] Error while using apply analysis

Sarang,

On 12/08/2010 12:58 AM, Sarang Gandhi HCL wrote:
> Roland,
>
>       Thanks for the valuable input which you had given in last mail.
>   Can i have following information.
>
>   1.Is this struts framework with 1.3 or greater version ?
>    
We use Struts 1.3.8.
>
>   2. Is velocity template engine is at the front end for the display logic?
>    
We use velocity to render the output for each individual operation.  In 
the operationsV7.xml file there is an attribute on the operation element 
called output_template.  When the product is finished, the Struts 
servlet passes control to the 
gov.noaa.pmel.tmap.las.view.LASVelocityViewServlet.  This renders the 
output into the correct form using the template defined in the 
output_template attribute and passes it back to the requesting client.  
In the UI most of the actual display logic is JavaScript populated with 
data retrieved via Ajax calls, but the lower right pane that display the 
plots is the place where the output from the Velocity template is 
typically rendered.


>   3. Adding new sets of functions or operations should i edit operationsV7.xml file
>    for particular data set.
>
>    

We've been having some discussion about what it is you might be trying 
to accomplish.  If you want to add a regression fit line to a particular 
product display for particular data sets, your best bet might be to 
modify the existing script to calculate the fit and display the line 
based on the value of a property.  Then you could control whether it 
appeared for a particular variable by adding a property to the variable 
definition in las.xml.

This would be easier than creating an entirely new operation.

Roland




> Thanks and Regrds
> Sarang Gandhi
>
>
>
>
> ----- Original Message -----
> From: "Roland Schweitzer"<Roland.Schweitzer@xxxxxxxx>
> To: "Sarang Gandhi HCL"<sarang@xxxxxxxxxxxxxx>
> Cc: "las users"<oar.pmel.las_users@xxxxxxxx>
> Sent: Tuesday, December 7, 2010 9:33:06 PM
> Subject: Re: [las_users] Error while using apply analysis
>
> Sarang,
>
> Unfortunately there is no clear and easy way to accomplish what you're
> asking.
>
> The analysis operations like ave and sum that can be applied to
> variables are built into the system.
>
> If you have particular data for which you want to make available new
> types of analysis you might be able to define a virtual variable using
> an F-TDS data set and configure the new variable into LAS.
>
> Roland
>
> On 12/07/2010 12:40 AM, Sarang Gandhi HCL wrote:
>    
>> Roland
>> Thank you very much for your help.
>> Then another question related to this is :-
>> How to extend apply analysis functionality to draw trend as i attached Snap shot from the ferret command line on Linux
>> Is there any need to change in the java code ?
>> Or only XML modification will solve my purpose .
>>
>> Thanks and Regards
>> Sarang Gandhi
>>
>>
>> ----- Original Message -----
>> From: "Roland Schweitzer"<Roland.Schweitzer@xxxxxxxx>
>> To: "Sarang Gandhi HCL"<sarang@xxxxxxxxxxxxxx>
>> Cc: "las users"<oar.pmel.las_users@xxxxxxxx>
>> Sent: Monday, November 29, 2010 8:01:23 PM
>> Subject: Re: [las_users] Error while using apply analysis
>>
>> Sarang,
>>
>> The key to getting the analysis option to work correctly with LAS is to
>> make sure you have completed all of the steps that are outlined in this
>> document:
>>
>> http://ferret.pmel.noaa.gov/LAS/documentation/installer-documentation/installation/installing-and-integrating-tds-with-las/
>>
>> You can verify that the Ferret IOSP code has been installed in your TDS
>> by looking at $TOMCAT_HOME/webapps/thredds/WEB-INF/classes/resources and
>> confirming the Ferret resources are installed in the "iosp" directory there.
>>
>> Once the steps above have been completed and you can verify everything
>> is working by looking at the
>> http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl.html
>> in your browser.
>>
>> The next version of LAS (7.2) which will be released shortly will test
>> F-TDS installation and report an error message if it is not installed
>> correctly.
>>
>> Roland
>>
>> On 11/25/2010 06:28 AM, Sarang Gandhi HCL wrote:
>>
>>      
>>> Hello Sir,
>>>
>>>      While using the Apply analysis tool
>>>      I have selected the two options one from Analysis type and another from analysis region type.
>>>      And i encounter the following error.
>>>
>>>            "STOP -script mode, ERROR RUNNING SCRIPT
>>>     **Internet Data error
>>>                 NetCDF: DAP server error (OPeNDAP/netCDF Error code -70)
>>>                 Data set: http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl_expr_%7B%7D           %7Blet+airt_1_regrid%3Dairt%5Bd%3D1%2Cx%3D66.09375%3A90%40ave%2Cy%3D-12.65625%3A26.71875%40ave%5D%7D
>>> SET DATA "http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl_expr_%7B%7D%7Blet+airt_1_regrid%3Dairt%5Bd%3D1%2Cx%3D66.09375%3A90%40ave%2Cy%3D-12.65625%3A26.71875%40ave%5D%7D";
>>> Command file, command group, or REPEAT execution aborted"
>>>
>>>       1. I have tried to use above link on ferret command prompt is also shows the same error
>>>          Command:?SET DATA "http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl";
>>>                 can you guide me how to rectify this error.
>>>
>>>
>>> Thanks and Regards
>>> Sarang Gandhi
>>>
>>>
>>>        
>>
>>      
>