[Thread Prev][Thread Next][Index]
Re: [las_users] Error while using apply analysis
Roland
Thank you very much for your help i could able to solve the problem.
Wanna ask next question about LAS Analysis development .
How can i extend Apply Analysis functionality Like trends?
Thanks once again
Thanks and Regards
Sarang Gandhi
----- Original Message -----
From: "Roland Schweitzer" <Roland.Schweitzer@xxxxxxxx>
To: "Sarang Gandhi HCL" <sarang@xxxxxxxxxxxxxx>
Cc: "las users" <oar.pmel.las_users@xxxxxxxx>
Sent: Monday, November 29, 2010 8:01:23 PM
Subject: Re: [las_users] Error while using apply analysis
Sarang,
The key to getting the analysis option to work correctly with LAS is to
make sure you have completed all of the steps that are outlined in this
document:
http://ferret.pmel.noaa.gov/LAS/documentation/installer-documentation/installation/installing-and-integrating-tds-with-las/
You can verify that the Ferret IOSP code has been installed in your TDS
by looking at $TOMCAT_HOME/webapps/thredds/WEB-INF/classes/resources and
confirming the Ferret resources are installed in the "iosp" directory there.
Once the steps above have been completed and you can verify everything
is working by looking at the
http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl.html
in your browser.
The next version of LAS (7.2) which will be released shortly will test
F-TDS installation and report an error message if it is not installed
correctly.
Roland
On 11/25/2010 06:28 AM, Sarang Gandhi HCL wrote:
> Hello Sir,
>
> While using the Apply analysis tool
> I have selected the two options one from Analysis type and another from analysis region type.
> And i encounter the following error.
>
> "STOP -script mode, ERROR RUNNING SCRIPT
> **Internet Data error
> NetCDF: DAP server error (OPeNDAP/netCDF Error code -70)
> Data set: http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl_expr_%7B%7D %7Blet+airt_1_regrid%3Dairt%5Bd%3D1%2Cx%3D66.09375%3A90%40ave%2Cy%3D-12.65625%3A26.71875%40ave%5D%7D
> SET DATA "http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl_expr_%7B%7D%7Blet+airt_1_regrid%3Dairt%5Bd%3D1%2Cx%3D66.09375%3A90%40ave%2Cy%3D-12.65625%3A26.71875%40ave%5D%7D"
> Command file, command group, or REPEAT execution aborted"
>
> 1. I have tried to use above link on ferret command prompt is also shows the same error
> Command:?SET DATA "http://10.4.6.26:8080/thredds/dodsC/las/coads_climatology_cdf/data_coads_climatology.jnl"
> can you guide me how to rectify this error.
>
>
> Thanks and Regards
> Sarang Gandhi
>
[Thread Prev][Thread Next][Index]
Contact Us
Dept of Commerce /
NOAA /
OAR /
PMEL /
TMAP
Privacy Policy | Disclaimer | Accessibility Statement