I want to locate the depth of maximum of AMOC in my model data. Here is the data
name title I J K L
ATLMOC ATL[I=@SUM,K=@RSUM] ... 1:331 1:75 1:140
!!!!! for finding maximum of ATLMOC for a fixed latitude (J=246) and depth level range (K=36:65) for time (L=140) !!!!!!!!
results = 1.670E+07
!!! Now I want to locate the depth of this maximum at j=246 and l=140 but this command is not working and it is not showing any value !!!!!!
list ATLMOC[j=246,k=@loc:16700000,l=140]
VARIABLE : DEPTH (m) of 16700000 in ATL[I=@SUM,K=@RSUM] (m)
X=0.5:360.5, Z=0:6004
FILENAME :
moc140.nc Y : 246
DEPTH (m): 0 to 6004 (location of 16700000)
TIME : 02-JUL-0140 12:00 NOLEAP
....
One can see the depth and its level (k) for the maximum value by
list ATLMOC[j=246,k=36:65,l=140]
333.9 / 36: 8.721E+06
370.7 / 37: 9.703E+06
411.8 / 38: 1.076E+07
457.6 / 39: 1.186E+07
508.6 / 40: 1.296E+07
565.3 / 41: 1.399E+07
628 / 42: 1.486E+07
697.3 / 43: 1.565E+07
773.4 / 44: 1.632E+07
856.7 / 45: 1.670E+07 !!! depth level of maximum value !!!!!1
947.4 / 46: 1.660E+07
1045.9 / 47: 1.601E+07
1152 / 48: 1.506E+07
1265.9 / 49: 1.395E+07
1387.4 / 50: 1.277E+07
1516.4 / 51: 1.150E+07
1652.6 / 52: 1.006E+07
1795.7 / 53: 8.410E+06
1945.3 / 54: 6.652E+06
2101 / 55: 4.997E+06
2262.4 / 56: 3.281E+06
2429 / 57: 1.515E+06
2600.4 / 58: -3.571E+05
2776 / 59: -1.591E+06
2955.6 / 60: -2.326E+06
3138.6 / 61: -2.764E+06
3324.6 / 62: -2.772E+06
3513.4 / 63: -2.801E+06
3704.7 / 64: -2.813E+06
3898 / 65: -2.774E+06
So I want to know how to locate the depth for the maximum value? I can not understand what mistake I am doing for this simple calculation.
Thanks in advance.
Cheers, Saurabh