Making multiple subplots & save the graphics o/p

[cshaji@xxxxxxxxxx]

Dear Ferret Users,

 I am new to using Ferret. I have a few doubts to clear.

1) How can I make multiple subplots (6 or more) in a plot window.
I understand the following will give 4 subplots. How do we go for more
than 4 plots?

set view ul !upper left
vector/overlay/l=5/leng=1./xskip=3/yskip=3 u,v

set view ur !upper right
vector/overlay/l=5/leng=1./xskip=3/yskip=3 u,v

set view ll !lower left
vector/overlay/l=5/leng=1./xskip=3/yskip=3 u,v

set view lr !lower right
vector/overlay/l=5/leng=1./xskip=3/yskip=3 u,v

2) How can I save the above graphics as postscript/pdf or better clarity
o/p ?
I used the command "frame/file=fig01.gif"
But the plot is not so good. I want to get a ps/higher quality plot.
What is the
command in Ferret for this?

3)Finally, when I plot the above current vectots, I always get the arrow
scale at the place where
the xlabel is supposed to come. How can I move the arrow scale to any of
my desired place?

Also how can I shade the land areas in the plot?

I would be glad if someone can give some useful hints.

Thanks

C. Shaji

=====================================================================
Dr. C. Shaji
School of Marine Science and Technology
University of Massachusetts Dartmouth
706 South Rodney French Blvd.
New Bedford, MA 02744-1221.
Phone: 508-910-6348 (O); 508-998-7347 (R),Fax: 508-910-6371.

To state the limitation of science is not to belittle it-M.K. Gndhi.
=====================================================================