Main, Axis, and Movable Label Heights

[Mick Spillane <spillane@xxxxxxxxxxxxx>]

The heights of labels can be controlled by the Plotplus command 
"labset" with the following syntax
	ppl labset hmain hxaxis hyaxis hmove
where hmain, hxaxis, hyaxis, and hmove are respectively the heights
in inches of the Main or Title label, the X-axis, the Y-axis and
Movable labels. For example

	plot/nolab/set/i=1:10/title="Main Label" 1/i
	ppl xlab X-axis Label
	ppl ylab Y-axis Label
	ppl labs 1 A Movable Label
	ppl labset 0.2 0.17 0.14 0.25
	ppl plot

Try this. The Main and Axis labels are drawn with the sizes requested
then a dialog box appears for the Movable label. Click on "Center" then
position the crosshairs where you want the movable label to go and
click again.

Note the plot/NOLAB above!  If the /NOLAB were absent size of the movable
label #1 would be that assigned to the first of the Ferret labels that
appear by default in the upper right "FERRET Ver. 5.22" which would then
disappear in the above example.  Heights of individual Movable Labels is
controlled by the Plotplus hlabs command as in
	ppl hlabs n hlabn
where n is a movable label number and hlabn its requested height in
inches which will override the default movable axis height set in the
"labset" command.




|--****--****-*---*---***--***--|____spillane@pmel.noaa.gov____|
|-*__---*-----*--*-*--*--*-*--*-|_SCIENCE APPLICATIONS SUPPORT_|
|--***--*-----*-*---*-***--***--|____EPIC/Ferret/PlotPlus______|
|-----*-*-----*-*****-*----*----|__Room 2070 Bldg#3 NOAA/PMEL__|
|-****---****-*-*---*-*----*----|____Phone_:_(206)526-6780_____|