Just in case it helps somebody else. We don't do the
internationalization of number and date formats well so for LAS you
might be better off running with a en-US locale.
Roland
-------- Original Message --------
Subject: Re: Problems and help with LAS 7.2
Date: Mon, 21 Mar 2011 14:46:00 -0300
From: Tiago Nicolosi Bomventi <tiagonb@xxxxxxxxx>
To: Roland Schweitzer <Roland.Schweitzer@xxxxxxxx>
Hi Roland!
i am just writing to tell you that the problem was solved. i just
change the
locale from 'pt-BR' to 'en-US' in tomcat server, changing the JAVA_OPTS
line, all is working fine now.
thank you very much for your answer, it was very helpfull!
Tiago
On Mon, Mar 21, 2011 at 12:22 PM, Roland Schweitzer<
Roland.Schweitzer@xxxxxxxx> wrote:
> Hi,
>
> I'm keeping this on the list so others can benefit.
>
> This is an internationalization issue. The code we provide
expects values
> to be formated with a period "." to denote the decimal place. So
a value of
> 359,94 should be 359.94.
>
> We'd like to be able to deal with all of the local formatting
options for
> numeric and date string, but we it's a relatively lower priority
for us.
>
> So, to fix the problem we need to track down the source of this
formatted
> string. It's possible that the numerical formatting code in the
LAS server
> is responding to the locale on your server and formatting the
string in a
> way that vizGal cannot handle.
>
> Or perhaps you have strings formatted in this way in the
configuration of
> the axes in your las.xml.
>
> Once we figure out who or what is formatting the string in this
way we can
> work on some solutions to get the formatting to be what vizGal is
expecting.
>
> Roland
>
>
> On 03/18/2011 04:54 PM, Tiago Nicolosi Bomventi wrote:
>
>> Thanks for attention Roland!
>>
>> i tried what you say, and in my console error, when a click in
the compare
>> button, it generate a lot of warnings and one error
>>
>> Error: [Exception... "'java.lang.NumberFormatException: For input
string:
>> "359,94"' when calling method: [nsIDOMEventListener::handleEvent]"
>> nsresult: "0x8057001c (NS_ERROR_XPC_JS_THREW_JS_OBJECT)" location:
>> "<unknown>" data: no]
>>
>> did you have some idea about this?
>>
>>
>> thanks!
>>
>>
>>
>>
>> On Fri, Mar 18, 2011 at 6:25 PM, Roland Schweitzer<
>> Roland.Schweitzer@xxxxxxxx> wrote:
>>
>> Hi,
>>>
>>> Somebody else will check on your status in the mailing list, but
I'm
>>> thinking you must be subscribed since this message made it through.
>>>
>>> Suggestions for the other issues below.
>>>
>>>
>>> On 03/18/2011 04:06 PM, Tiago Nicolosi Bomventi wrote:
>>>
>>> Hi everybody!
>>>>
>>>> i am trying to subscribe in the las_users list to resolve some
problems
>>>> that
>>>> i am facing with LAS, but i never get a confirmation of
majordomo and i
>>>> even
>>>> know if i am signed or not because the comand who "las_users" is
>>>> disable.
>>>> i
>>>> sent an email to majordomo (fromcojaq@xxxxxxxxxxx) following
the steps
>>>> in
>>>> this page.
>>>>
>>>>
http://ferret.pmel.noaa.gov/LAS/email-users-group/email-users-group
>>>>
>>>> and this is not working. so i will ask for help here if it is
not a
>>>> problem
>>>> for you.
>>>>
>>>> i have two questions that i don't know where to look for answer:
>>>>
>>>> 1) I have instaled LAS7.2, Thredds 4.2, Tomcat6 and Ferret
6.67,
>>>> everything works fine and no problems during instalation, all
products
>>>> works
>>>> fine, expect the Compare Product. When i click in the Compare
Button, my
>>>> VizGal page open ok, but the plot never appear in any one of the 4
>>>> windows,
>>>> It keeps loading and loading and never get a response, the
components of
>>>> las
>>>> all plots do well, is just a problem inside VizGal page. Does
someone
>>>> have
>>>> any ideia about this kind of problem? What i could do?
>>>>
>>>> First thing to do is open the browser's JavaScript error
console and
>>> look
>>> for errors that appear when the vizGal page loads. Also try
several
>>> different browsers. And if you've used an older version of
vizGal from
>>> the
>>> same site trying clearing your browser cache.
>>>
>>> It's supposed to work in all browsers and it's supposed to tell the
>>> browser
>>> what to cache and what not to cache, but these are still go
thing to try
>>> if
>>> you're having problems.
>>>
>>> Finally, once the vizGal page load, try using the data set
button to
>>> select
>>> the same data set again. Sometimes the problem is that the
communication
>>> between the LAS UI and vizGal breaks down.'
>>>
>>>
>>>
>>> 2) Another question, can't i have two wind vector composite
defined
>>>> inside the same dataset? that's really a limitation of LAS or i
am doing
>>>> some wrong?
>>>>
>>>> Each vector goes in it's own composite. Like this:
>>> <composite>
>>> <wind_vectors10 name="wind vector 10m">
>>>
>>> <properties>
>>> <ui>
>>> <default>file:ui.xml#VecVariable</default>
>>> </ui>
>>> </properties>
>>> <link
>>>
match="/lasdata/datasets/id-5b213f2495/variables/u10-id-5b213f2495"/>
>>> <link
>>>
match="/lasdata/datasets/id-5b213f2495/variables/v10-id-5b213f2495"/>
>>> </wind_vectors10>
>>> </composite>
>>> <composite>
>>> <wind_vectors50 name="wind vector 50m">
>>>
>>> <properties>
>>> <ui>
>>> <default>file:ui.xml#VecVariable</default>
>>> </ui>
>>> </properties>
>>> <link
>>>
match="/lasdata/datasets/id-5b213f2495/variables/u50-id-5b213f2495"/>
>>> <link
>>>
match="/lasdata/datasets/id-5b213f2495/variables/v50-id-5b213f2495"/>
>>> </wind_vectors50>
>>> </composite>
>>>
>>>
>>> Roland
>>>
>>>
>>>
>>> Let me show my example:
>>>
>>>> Supose i would like to plot two kind of wind vectors, for 10
and 50
>>>> meters,
>>>> using de variables u10, v10, u50 and v50, all in the same
dataset. I am
>>>> trying this code, but beside both names (wind vector 10m and
wind vector
>>>> 50m) appear in the "Choose dataset" dialog, i can just plot one
of that,
>>>> if
>>>> i try to plot another, LAS just plot the same vectors.
>>>>
>>>>
>>>> <composite>
>>>> <wind_vectors name="wind vector 10m">
>>>> <properties>
>>>> <ui>
>>>> <default>file:ui.xml#VecVariable</default>
>>>> </ui>
>>>> </properties>
>>>> <link
>>>>
match="/lasdata/datasets/id-5b213f2495/variables/u10-id-5b213f2495"/>
>>>> <link
>>>>
match="/lasdata/datasets/id-5b213f2495/variables/v10-id-5b213f2495"/>
>>>> </wind_vectors>
>>>> <wind_vectors name="wind vector 50m">
>>>> <properties>
>>>> <ui>
>>>> <default>file:ui.xml#VecVariable</default>
>>>> </ui>
>>>> </properties>
>>>> <link
>>>>
match="/lasdata/datasets/id-5b213f2495/variables/u50-id-5b213f2495"/>
>>>> <link
>>>>
match="/lasdata/datasets/id-5b213f2495/variables/v50-id-5b213f2495"/>
>>>> </water_vectors>
>>>> </composite>
>>>>
>>>>
>>>> Thanks for attention
>>>>
>>>> Tiago Bomventi
>>>>
>>>>
>>>>
>