Hi-
The combinations of commands can be confusing. I think you'll need
to do it in two steps. Make sure to use the /SET command on your
FILL command. That's what will allow the SHAKEY to take effect.
set v v21; fill/lev=($t_levels)/k=1/l=7/key/nolab temp
ppl shakey 1 0 .12 1 3 9 1.9 11.85 0.35 0.65
ppl fill
contour/over/nokey/lev=($t_levels)/k=1/l=7/nolab temp
go fland
On 5/31/2012 2:11 AM, Sudev Das M P wrote:
Hi,
Thanks for the reply. Now I am able to draw shaded plot with line
contours and I also plotted the
color bar. But I am not able to adjust the color bar using
"shakey" settings. I am drawing the color bar
with subplot v21 and the color bar is coming on the right side of
v21 in the vertical position. I want this
to be horizontal and I tried to adjust it using the "shakey"
command but it is not working.
-----------------------------------------------------------------------------------------------
set v v21; contour/line/fill/lev=($t_levels)/k=1/l=7/key/nolab
temp
ppl shakey 1 0 .12 1 3 9 1.9 11.85 0.35 0.65
ppl fill/contour/line
go fland
---------------------------------------------------------------------------------------------
Please give me some idea so that I can adjust the color bar
accordingly.
The figure I created is attached with this mail. Please have a
look.
Thanks,
Sudev
On Wed, May 30, 2012 at 11:30 AM, Kankan
Sarkar <kankan.math@xxxxxxxxx>
wrote:
Dear Sudev,
Here "fill" gives shaded figure. To overlap the contour
you can use "over".
You can write your jnl file as:
set v v21
contour/fill/lev=($t_levels)/k=1/l=7/nolab temp
contour/line/over/lev=($t_levels)/k=1/l=7/nolab temp !
overlap contours
Thanks,
Kankan
On Wed, May 30, 2012 at 10:03 AM,
Sudev Das M P <devdas.pnr@xxxxxxxxx>
wrote:
Hai,
I want to plot both contour lines and shade
together in the same figure.
1. If I use "set v v21;
fill/lev=($t_levels)/k=1/l=7/nolab/set temp", I am
getting only shaded
plot. In order to get contour line I have to use
"contour/line/fill/lev=($t_levels)/k=1/l=7/nolab
temp".
Then I am not able to see color bar in the plot.
2. I am drawing the color bar with the subplot
v21. In v21 I am not using the "nokey" command.
set v v21;
contour/line/fill/lev=($t_levels)/k=1/l=7/nolab
temp
ppl shakey 1 0 .12 1 3 9 1.9 11.85 0.35 0.65
ppl fill/contour/line
Hope to get a valuable suggestion.
Thanks,
Sudev
On Tue, May 29, 2012 at 4:44 PM, Kankan Sarkar <kankan.math@xxxxxxxxx>
wrote:
Dear Sudev
You used : set view v11;
contour/line/fill/lev=($t_levels)/K=1/L=1/nokey/nolab
temp
Just remove nokey, then the color bar will
come.
Regards,
Kankan
On Tue, May 29,
2012 at 4:18 PM, Sudev Das M P <devdas.pnr@xxxxxxxxx>
wrote:
Hi,
I like to include contour lines in the
shaded plot. I tried doing this
but then the color bar
disappeared from the plot. The script
I am using is given below.
Please give me your
advise to solve this problem.
Thanks,
Sudev
=======================================================
!******************************************************************************
! Defining the limits for 4 subplots.
!*******************************************************************************
!Defining the limits for the subplots.
define
view/axes/xlimits=0.07,0.50/ylimits=.6,.95
v11
define
view/axes/xlimits=0.53,0.96/ylimits=.6,.95
v12
define
view/axes/xlimits=0.07,0.50/ylimits=.2,.55
v21
define
view/axes/xlimits=0.53,0.96/ylimits=.2,.55
v22
use climatology_monthly_tempt.nc
!------------------------------------------------------------
!Defining the levels that we want to
show in the color bar.
define symbol t_levels =
(-inf)(19,30,1)(inf)
!------------------------------------------------------------
! Draw 4 months of plots. Set the
contour levels on the first one, and
then use /LEV
! to reuse the same levels on other
plots.
!------------------------------------------------------------
ppl axlabp,-1,-1 ! Label on x and
y-axis,
set view v11;
contour/line/fill/lev=($t_levels)/K=1/L=1/nokey/nolab
temp
go fland
! Make a label above each plot with
the month.
label/nouser `($ppl$xlen)/2`,
`($ppl$ylen)-0.2`,0,0,0.12,"(a)
January"
!------------------------------------------------------------
ppl axlabp,-1,0 ! Label x-axis on the
bottom
set v v12;
contour/line/fill/lev=($t_levels)/k=1/l=4/nokey/nolab
temp
go fland
label/nouser `($ppl$xlen)/2`,
`($ppl$ylen)-0.2`,0,0,0.12,"(b) April"
!------------------------------------------------------------
! This plot will include the color
key. It's drawn using SHAKEY settings.
ppl axlabp,-1,-1 ! Label x-axis on the
bottom, y-axis, on the left
set v v21;
contour/line/fill/lev=($t_levels)/k=1/l=7/nolab
temp
ppl shakey 1 0 .12 1 3 9 1.9 11.85
0.35 0.65
ppl fill/contour/line
go fland
label/nouser `($ppl$xlen)/2`,
`($ppl$ylen)-0.2`,0,0,0.12,"(c) July"
label/nouser `($ppl$xlen)/0.97`,
`($ppl$ylen)-4.6`,0,0,0.20,"Longitude"
label/nouser
-0.65,4.0,-1,90,0.22,"Latitude"
!------------------------------------------------------------
ppl axlabp,-1,0 ! Label x-axis on the
bottom
set v v22;
contour/line/fill/lev=($t_levels)/k=1/l=10/nokey/nolab
temp
go fland
label/nouser `($ppl$xlen)/2`,
`($ppl$ylen)-0.2`,0,0,0.12,"(d)
October"
!------------------------------------------------------------
set view full
plot/nolab/noaxes/color=white/sym/i=1:2
i
label/nouser
`($ppl$xlen)/2`,7.1,0,0,0.16,
Climatology TEMP (Deg C)
=============================================
--
*****************************************************************************************
Kankan Sarkar
Junior Research Fellow
Physical Oceanography Division
National
Institute of Oceanography(CSIR)
Dona Paula - 403 004, Goa, India
Mob.
No- +919595713493
--
*****************************************************************************************
Kankan Sarkar
Junior Research Fellow
Physical Oceanography Division
National
Institute of Oceanography(CSIR)
Dona Paula - 403 004, Goa, India
Mob.
No- +919595713493
|